CHTXQ-2255龙门架多线切割机技术参数 Main Specifications

设备用途：本机型的刀架为固定刀架，一共三个罗拉，罗拉长度为570/620mm，用于切割厚度0.3mm-12mm的产品。

Equipment use: The tool holder of this model is a fixed tool holder, with a total of three rollers, the length of the roller is 570/620mm, which is used for cutting products with a thickness of 0.3mm-12mm.

CHTXQ-2255龙门架多线切割机技术特点 Brief Introduction

1、设备整机铸件，刀架采用龙门架结构，龙门架坐落在整体铸件之上和整机铸件合为一体，电机转动无振动，高速运转更稳定

2、三罗拉刀架铸造整体成型，独立伺服电机驱动平稳高速运转，确保切割质量。

3、三电机独立驱动三罗拉，使三罗拉都成为主动轴，降低钢线对罗拉的磨损，提高罗拉的使用时间。

4、罗拉⽀架安装孔用加工中心一次加工成型，确保主轴安装同轴度要求。

5、罗拉采用双锥结构，拆卸方便、定位准确、高速运转平稳，精度可靠。

6、下置式工作台，材料由下向上上升切割，上下料方便。

7、双浇砂设计，更有利于废屑的排放和清洗。

8、装载面积大，分别为：220mm*570/620mm*180mm。

9、操作使用方便，自动升降护罩，工作台全面展开，便于材料装卸和罗拉拆装。

1, the  machine  casting,  the  tool  frame  adopts  the  gantry  structure,  the  gantry  is located  on the  whole  casting  and the  machine  casting into one, the motor rotation without vibration, high-speed operation is more stable.

2, three  roller  tool  frame  casting  overall  forming,  independent  servo  motor drive smooth high-speed operation, to ensure cutting quality.

3, three motor independently drive three rollers, so that the three rollers are the drive shaft, reduce the wear of the steel wire to the roller, improve the use of the roller time.

4, the roller bracket installation hole with a machining center molding, to ensure that the spindle installation coaxial requirements.

5, the  roller  adopts  double  cone  structure,  easy  disassembly,  accurate  positioning, stable high speed operation, reliable accuracy.

6, under  the  table,  the  material  from  the  bottom  up  to  cut,  loading  and  unloading convenient.

7, double casting sand design, more conducive to waste discharge and cleaning.

8, the loading area is large, respectively: 220mm*570/620mm*180mm.

9, the operation is easy to use, automatic lifting shield, the workbench is fully expanded, easy to load and unload materials and roll.

10, high efficiency and low consumption, the equipment does not need air source, the power consumption of the whole machine does not exceed 15kw.