北京鼎信优威光子科技有限公司
高级会员第2年 参观人数:31328
  • 参考报价:电议
    型号:
    产地:德国
    在线咨询
  • 详细介绍:


    产品详细介绍:

    PMC-100 规格表
    • 通过DCC-100 模块进行制冷控制及过载关闭
    • **的TCSPC 仪器响应: < 200 ps FWHM
    • 内置GHz 前置放大器: 高输出放大
    • 过载指示及TTL / CMOS 过载输出
    • +12V 电源 - 内置高压发生器
    • **的噪声均一度
    • 标准 C Mount接口
    • **的光子计数性能
    • 与所有bh 光子技术器都有接口
    应用: Time-Correlated, Steady State and Gated Photon Counting, Non-descanned Detector for TCSPC Imaging
    PMH-100 规格表
    • Excellent Photon Counting Performance
    • Time Resolution < 200 ps FWHM
    • Spectral Ranges: 300-650 nm, 300-820 nm, 185-820 nm
    • Count Rate > 10 MHz
    • Internal GHz Preamplifier
    • Overload Indicator LED
    • +12V Supply - No HV required!
    • Small Size, Low Cost
    PML-16 规格表
    • 16 Channel TCSPC with bh SPC Modules
    • Simultaneous Measurement in all 16 channels
    • 1 by 16 Arrangement of Detector Channels
    • Time Resolution 200 ps FWHM
    • Spectral Ranges: 300-650 nm, 300-820 nm
    • Count Rate > 1 MHz
    • Power Supply: HV <1kV, ?V from SPC/li>
    • 外形小巧- 没有外部控制器
    应用: Time-Correlated, Steady State and Gated Photon Counting, Non-descanned Detector for TCSPC Imaging
    APM-400 规格表
    • Avalanche Photodiode Module
    • Active Areas from 0.03 mm?to 7 mm?
    • 150 ps Pulse Rise Time / 320 ps FWHM
    • Internal Temperature Compensation
    • Spectral Range from 330 nm to 1100 nm
    • Single +12V supply
    PHD-400 规格表
    • Photodiode Module
    • Pulse Response Width 400 ps
    • Pulse Rise Time <200 ps
    • Spectral Range 330-1050 nm
    • Current Indicator
    • +5V or +12 V Supply
    PDM-400 规格表
    • Photodiode Module
    • Pulse Response Width 400 ps
    • Pulse Rise Time <200 ps
    • Spectral Range 330-1050 nm
    • +5V or +12 V Supply
    PDI-400 规格表
    • Integrating Photodiode Module
    • Pulse Energy Measurement
    • Low Noise, High Dynamic Range
    • Sensitivity in the fJ Range
    • Active Area from 0.25 to 7.5 mm
    • Power Supply ? to ?5 V
    OCF-401 规格表
    • Optical Constant Fraction Discriminator
    • Accurate triggering on optical pulses
    • Time walk < ?0 ps for 1 ns pulse and 1:10 pulse amplitude change
    • 1V output pulse amplitude
    • Single +5 V supply
    • Trigger indicator LED