上海拜普实业有限公司
高级会员第2年 参观人数:187218
  • 参考报价:电议
    型号:
    产地:美国
    在线咨询
  • 详细介绍:


    Monitor

    Static Control

    Antistatic, Mats / Checker / Monitor

    Multimount Continuous

    Surface Resistance Checker

    Easily determine if a surface is dissipative,

    Continuously monitors single operator and ESD workstation—

    eliminating the need for periodic testing

    ■ Meet ISO 9000 and ANSI/

    ESD S20.20 test logging

    requirements

    ■ Audible and visual alarms

    notify operator of

    out-of-limit conditions

    ■ Easily install on most

    equipment or workbench

    surfaces

    Use this continuous monitor to

    ensure that critical ESD generators

    conductive, or insulative

    Ensure compliance to

    ANSI/ESD S20.20-2007

    per ESD TR53

    Use optional electrodes

    for resistance

    measurements of

    larger surfaces

    This portable meter is perfect

    for quick checks of surface

    resistance for ESD control

    applications in electronics

    manufacturing or handling

    environments. Simply press and

    in sensitive areas are effectively

    grounded. Unit features green (grounded)

    20028-08

    hold the test button until the bright

    LEDs display the reading level.

    Unit features an automatic test

    and red (not grounded) LEDs notifying operator of continuous

    personal and mat grounding status.

    The 4-mm parking snap allows time for the operator to disconnect

    the coil cord from the wrist band and park it on this snap. While

    parked, the coil cord disables the alarm, allowing the operator to

    leave the workstation. Upon returning and removing the coil cord

    from the parking snap, the operator has six seconds to hook up to

    the wrist band before the alarm sounds.

    What’s included: two 6-ft (1.8-m) mat monitor cords, two push-

    and-clinch snaps, mounting hardware and brackets, one set of

    voltage selector allowing the test

    voltage to switch from 10 V to

    100 V if the measured resistance

    exceeds 1 x 10E5 ohms. Two banana

    jacks and an electrode toggle switch

    allow for the connection of two

    optional external 5-lb electrodes that

    measure surface resistance point to

    point, or resistance to equipment ground.

    What’s included: one 9 V battery and

    20028-01

    hook-and-loop fasteners, and

    NIST-traceable calibration report supplied by the manufacturer.

    Specifications

    Range: 500 KΩ to 10 MΩ Dimensions (L x W x H):

    NIST-traceable calibration report supplied by the manufacturer.

    Specifications

    Range: 10E3 to 10E12 ohms Power: one 9 V battery

    Accuracy: ±1?2 decade Dimensions (L x W x H): 51?4" x 3" x 1"

    Alarm response time: <50 ms

    Catalog number Description

    33?4" x 2" x 1" (9 .5 x 5 x 2 .5 cm)

    Power (50/60 Hz)

    Price

    Display: 10 colored LEDs

    Catalog number

    Description

    (13 .3 x 7 .6 x 2 .5 cm)

    Price

    SN-20028-08

    Continuous static

    control monitor

    220 VAC

    SN-20028-01

    Surface resistance checker

    ESD Mats

    Eliminate static from your work area

    SN-20028-03 Test leads, one pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    SN-20028-05 External electrodes, 5 lb, one pair . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Specifications

    Compliance: ANSI/ESD S20 .20

    Catalog

    Statfree

    Dimensions

    RTG

    number

    Benchtop mats

    material type (L x W x thickness)

    (Ω) Package Price

    SN-26809-60? T2, blue

    SN-26809-61? T2, gray

    48" x 24" x 1?16"

    (122 x 61 x 0 .2 cm)

    106 to 108

    dissipative

    Mat kit

    SN-26809-62 T2, blue 480" x 24" x 1?16"

    side/

    Roll

    26809-60

    26809-61

    26809-74

    SN-26809-64 T2, gray

    SN-26809-63 T2, blue 480" x 36" x 1?16"

    SN-26809-65 T2, gray

    <104

    conductive

    side

    Roll

    Desco mats are available in a variety of materials for your static

    control applications and meet ANSI/ESD S20.20 requirements.

    Statfree® Type T2 Benchtop Mats have superior heat-, chemical-,

    Floor mats

    SN-26809-73?

    SN-26809-74??

    CV

    i

    72" x 48" x 1?8" 103 to 105 Mat kit

    36" x 24" x 1?2" 103 to 105 Mat kit

    and wear-resistance. All feature two layers of 100% nitrile

    butadiene industrial-grade rubber; the top layer is dissipative and

    the bottom layer is conductive. Available in blue or gray, in kit

    or roll.

    Statfree® Type CV Floor Mat Kit has excellent chemical-resistance,

    is humidity independent, and is made of conductive vinyl.

    Statfree® Type i Floor Mat Kit interlocks to provide anti-fatigue

    properties over large areas. Mat features conductive rubber

    construction and an ergonomic dome/support cell structure design.

    ???Includes ground kit 26809-66 ?Includes ground kit 26809-76

    Includes snap kit 26809-68

    SN-26809-66 Wrist strap/bench mat common ground kit.

    Includes common point 15-ft (4 .6-m) ground cord, resistor with

    10-mm snap stud, and universal snap kit 26809-68 . . . . . . . . . . . . . . . . . . . . . . . . . .

    SN-26809-68 Universal snap kit. Includes one 10-mm male stud,

    one 10-mm female socket, and one long and one short screw . . . . . . . . . . . . . . . . .

    SN-26809-76 Floor mat ground kit. Includes 15-ft (4 .6-m) ground cord,

    resistor with 10-mm snap stud, and snap kit 26809-68 . . . . . . . . . . . . . . . . . . . . . . .

    Compact Static Charge Meters

    Static Control

    Antistatic, Meters / Blowers / Test Kit

    St

    Measure the magnitude and polarity of electrostatic fields produced by charged objects

    Analog Meter instantly measures static charges. Achieve higher resolution when

    measuring below 3000 volts by setting the range selector to LOW setting; measure up to

    30,000 volts in the HIGH range simply by multiplying the reading by ten. The “quick zero”

    function re-zeros the meter for repetitive measurements.

    Digital Meter with Output measures electrostatic fields by increasing the meter to charged

    surface distance. Meter features a 31?2-digit, 0.4"H LCD. HOLD button freezes current

    reading. Easily zero the meter with the turn of a knob, there is no need to re-zero between

    measurements. The output lets you permanently record your results. Order charge plate

    detector separately below to verify proper operation of air ionizers and increase meter

    sensitivity by a factor of ten.

    What’s included: one 9 V battery. Digital meter 37715-70 also includes a carrying case.

    Analog meter

    17797-30

    Leather case

    17797-32

    Catalog number Type

    SN-17797-30 Analog

    Range

    0 to 30,000 V

    Output

    Dimensions (L x W x H)

    43?8" x 25?8" x 13?8" (11 .2 x 6 .7 x 3 .5 cm)

    Price

    SN-37715-70 Digital 0 .00 to ±19 .99 kV at 1" 10 mV/kV 41?4" x 23?8" x 1" (10 .8 x 6 .1 x 2 .5 cm)

    SN-17797-32 Leather case for meter 17797-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    SN-09376-04 Replacement batteries, 9 V . Pack of 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Ionized Air Blowers

    Automatically maintain a balanced ion output

    Portable Ionized Air Blower is compact, lightweight, and ideal for

    field use. Blower features an emitter cassette that slides out for easy

    cleaning and replacement. The grounded metal case eliminates

    high-voltage fields for greater safety. Airflow output can be adjusted

    for greater worker comfort. Visual and audible alarms and

    “Clean Me” indicator automatically signal when cleaning and

    maintenance are required.

    Benchtop Ionized Air Blower emits ions in a true laminar flow

    reducing ion recombination and emitter contamination. AC ionizing

    system neutralizes static charges at a greater distance while the fixed

    temperature heater increases worker comfort. Gold-plated emitters

    provide longer service life.

    What’s included: NIST-traceable calibration report supplied by the manufacturer

    and a 71?2-ft (2.2-m) power cord (on 120 VAC models only).

    Catalog number Type Max airflow output Dimensions (W x H x D) Power (50/60 Hz) Price

    SN-26809-44 Portable 81?2" x 73?4" x 31?2" 120 VAC

    26809-50 Digital meterwith output

    37715-70 SN-26809-46

    SN-26809-50 Benchtop

    77 cfm

    117 cfm

    (21 .6 x 19 .7 x 8 .9 cm)

    11" x 9" x 7"

    240 VAC

    120 VAC

    SN-26809-52

    (27 .9 x 22 .9 x 17 .8 cm)

    240 VAC

    26809-44 SN-26809-48 Replacement emitter cassettes for portable ionized air blower . One pair . . . . . . . . . . . . . . . . . . . . .

    Ionization Test Kit

    Provides convenience and portability for testing of air ionizers

    Use this ionization test kit to conduct regular auditing of air ionization equipment ensuring

    compliance. Test kit includes a static field meter to measure the offset voltage (balance)

    and charge decay of air ionizers, along with a charger for placing a ±1000 V charge on

    the included conductive plate to meet ANSI/ESD SP3.3 standards. System is easy to use;

    place the plate assembly on the static field meter, zero the meter, and then begin taking

    measurements. Static meter also features a Hold function allowing you to easily read or

    save measurements on the screen for later reference.

    What’s included: digital static field meter, slide-on conductive plate, charger, data output

    cord, carrying case, two 9 V batteries, and NIST-traceable calibration report supplied by

    the manufacturer.

    Specifications

    Range

    Low: 0 to ±1 .99 kV / inch

    High: 0 to ±19 .99 kV / inch

    Catalog number

    SN-20028-09

    Accuracy

    Monitor output: > ±5% of reading

    ±10 mV; Display: > ±5% of

    reading ±2 counts

    Description

    Ionization test kit

    Stability: ±10 counts

    Display: LCD

    Power: one 9 V battery

    Dimensions (L x W x H): 5" x 23?4" x 1"

    (12 .7 x 7 x 2 .5 cm)

    Price

    美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器美国Desco静电消除器