上海载德半导体技术有限公司
高级会员第2年 参观人数:83544
  • 参考报价:电议
    型号:
    产地:美国
    在线咨询
  • 详细介绍:


    Etching of metals which do not have volatile compounds such as Cu, Au cannot be accomplished in RIE systems. On the other hand, physical etching with accelerating Ar ions is possible. Typically surface is patterned with thick resist for masking, and the energetic ion flux during etching overheats the substrate and the resist. Unless efficient means of removing the heat is found resist becomes very difficult to remove.

    We have demonstrated capability of keeping substrate temperature below 50 °C along with wafer rotation to achieve the desired uniformity which makes it possible to etch wafers with resist pattern.

    Features

    1. 不锈钢方型离子束腔体 14.5" SS Cube ion beam chamber

    2. 1000伏直流离子枪 12 cm DC Ion gun 1000V, 500 mA ,DC motor driven SS shutters

    3. 离子束中和器 Ion Beam neutralizer

    4. 质量流量控制的氩气路 Ar MFC

    5. 6"水冷基底卡盘 Chilled water cooled 6” substrate platen

    6. 晶圆旋转 Wafer rotation 3-10 RPM, Vacuum stepper motor

    7. 晶圆倾斜 Wafer Tilt with a stepper motor through differentially pumped rotational seal

    8. 样品自动取放 Manual or Auto wafer load/unload

    9. 刻蚀速度 Typical Etch Rates: 200A/min Cu, 500A/min Si

    10. 刻蚀均匀性 +/-5% etch uniformity over 4“ area

    11. 真空度 5x 10-6 Torr < 20 minutes <2 x10-7 Torr (2 days) Base Pressure with 500 l/sec turbo

    12. 极限真空度 8x10-8 Torr Base pressure with 1000 l/sec Turbo pump

    13. 磁控溅射氮化硅保护金属表面不被氧化 Magnetron Sputtering of Si3N4 to protect etched metal surfaces from oxidation

    14. 计算机控制 PC Controlled with LabVIEW Software

    15. 菜单驱动,密码保护 Recipe Driven, Password Protected

    16. 全安全互锁 Fully Safety Interlocked