北京联博永通科技有限公司(美国通用toc,瑞士梅特勒-托利多授权经销商)
高级会员第2年 参观人数:60411
  • 参考报价:电议
    型号:
    产地:瑞士
    在线咨询
  • 详细介绍:


    Accuracy at low oxygen level.

    METTLER TOLEDO’s InPro6900i is the intelligent counterpart for the InPro6900, the proven standard especially in food and beverage applications for low oxygen concentrations. The special electrode design with guard ring around the cathode together with the larger surface of the cathode allows for measurement down to 1ppb dissolved oxygen.

    Thanks to the integrated ISM technologywith Plug and Measure capability makes installation much easier and offers new possibilities for maintenance planning thanks automated self diagnosis and asset management. Together with the iSense Asset Suitealways one step ahead.

    规格 - InPro 6900(i) 痕量极谱法氧气传感器

    市场 /应用酿造应用中的消毒/卫生过程
    精度1 % + 1 ppb

    1 % + 3 ppb

    消毒的yes
    耐高压no
    液接材质stainless steel (AISI316L) with 3.1B certificates
    机械耐压max. 12 bar (174 psi) absolute
    连接器VP
    检测极限在水溶液中为 1 ppb 至饱和

    在含二氧化碳溶液中为 3 ppb 至饱和

    ISMyes
    ATEX证书SEV 14 ATEX 0169 X

    Ex ia IIC T6/T5/T4/T3 Ga/Gb

    Ex ia IIIC T69oC/T81oC/T109oC/ T161oC Da/Db

    IECEx Certificate of ConformityIECEx SEV 14.0026X

    Ex ia IIC T6/T5/T4/T3 Ga/Gb

    Ex ia IIIC T69oC/T81oC/T109oC/ T161oC Da/Db

    FM批准IS/ I, II, III /1 /ABCDEFG /T6
    Insertion lengthfor 12 mm: 70, 120, 220 mm (2.8", 4.7", 8.7")

    As with all oxygen sensors from METTLER TOLEDO also the ISM sensors fulfill highest requirements for hygienic design in compliance with EHEDG and 3-A standards. The proven maintenance concept with membrane body and replaceable inner body is continued with all i-type sensors.

    Features and Benefits

    Enhanced diagnostics
    • Permanent sensor monitoring with ISM technology reduces the risk sensor failures.

    Predictive maintenance
    • The enhanced diagnostics allows for better maintenance planning "as few as possible, as often as necessary".

    High process safety
    • FDA compliant materials of construction and easy-to-clean high-polished surface (N5 grade) to satisfy increasing regulatory requirements.

    Reduced service time down to just 5 minutes
    • Thanks to the easy-to-replace membrane body and quick-disconnect interior body.

    Long sensor lifetime
    • Durable and rugged sensor design for increased resistance to harsh environments.

    Installation in hazardous zones
    • ATEX certificate: SEV 14 ATEX 0169 X

      Ex ia IIC T6/T5/T4/T3 Ga/Gb

      Ex ia IIIC T69oC/T81oC/T109oC/ T161oC Da/Db

      IECEx Certificate of Conformity: IECEx SEV 14.0026X

      Ex ia IIC T6/T5/T4/T3 Ga/Gb

      Ex ia IIIC T69oC/T81oC/T109oC/ T161oC Da/Db

      FM approval: IS/ I, II, III /1 /ABCDEFG /T6