美国安普科技中心
高级会员第2年 参观人数:19842
  • 参考报价:电议
    型号:
    产地:美国
    在线咨询
  • 详细介绍:


    Ample Technology ATC – 6900 GC 同样的品质,更多的选择。

    ATC 6900 GC是美国安普科技中心**推出的气相色谱仪,该仪器以强大的APC技术(Advanced pneumatic control先进气压控制)全面控制整体系统的流量;创新的指尖触摸直接操作直观可感知的操作界面;强大的网络(LAN)通讯加速了数据处理速度。

    国际通用的强大ATC-Clarity色谱数据处理及仪器控制软件。该软件符合21CFR Part 11.

    ATC 6900 GC色谱主机与Tekmar公司的StratumPTCTM吹扫捕集浓缩仪、AquatekTM100液体自动进样器、AtomxTM固/液全自动吹扫捕集仪、VersaTM顶空自动进样器、HT3TM静态/动态顶空自动进样器等前处理设备,可**、轻松地完成您的分析工作。

    A. Features(仪器特征)

    触摸显示直观图形界面

    Intuitive graphic user interface with large touchpad color LCD (5.7”).

    强大的APC使分析更精确

    Strongly enhanced powerful APC for accurate and precise results

    自动存储20种分析方法

    Automatic loading and saving up to 20 different analytical methods.

    高速的网络数据传输

    High speed data process by network (LAN) communication.

    可安装多种进样口和检测器

    Various inlets and detectors installable up to three per each.

    自动关机

    Time control : Automatic turn-on/off

    10个加热区

    Ten heated zone :

    1 heated oven zone

    3 heated injector zone

    3 heated detector zone

    2 heated valve zone

    1 heated methanizer zone

    B. Specifications(规格详述)

    1. Gas Chromatograph ATC 6900 GC Oven System Module(主机系统)

    柱箱容积:14L

    Usable volume : 14L

    自动控制冷却控制

    Automatic cooling under processor control

    温度控制范围:环境温度4-450℃

    Temperature operating range : 4℃ above ambient to 450℃ or more

    25平台,26阶程序升温

    Programming: 25 ramps, 26 steps temperature program

    **升温速率:100℃/min

    Maximum set-point heating rate: 100℃/min

    冷却速率:450℃ 降至50℃ 需6.5分钟

    Cool down rate: 6.5 minutes from 450℃ to 50℃

    控温精度:±0.01℃ (等度), ±0.1℃ (梯度)

    Temperature stability : ±0.01℃ (Isothermal), ±0.1℃ (Gradient)

    2. Injector ( Maximum no. of inlet installation: three)(注样器系统,可安装3个)

    (1) Packed inlet(填充柱进样系统)

    **设定温度:450

    Maximum Temperature : 450 oC

    压力设定范围:

    Pressure setting range : 0.01 ~ 100 psi

    总流量设定范围:

    Total flow setting range : 0.1~100 ml/min

    (2) Capillary inlet (Split/Splitless)(毛细管进样系统(分流/不分流))

    **设定温度

    Maximum Temperature : 400oC

    压力设定范围:

    Pressure setting range : 0.01 ~ 100 psi

    总流量设定范围:

    Total flow setting range :

    0.1 ~ 400 ml/min N2

    0 ~ 1000ml/min He

    3. Advanced Pneumatic Control(气压控制)

    6个APC模块控制注样器、检测器和辅助气

    所有气体均有APC控制

    All gas flows controlled by APC

    程序流量:5阶

    Programmed Flow : 5step

    程序压力:5阶

    Programmed Pressure : 5step

    检漏测试

    Leak detection

    检漏报警后,自动运行到关闭状态

    After an alarm for a shortage of gas, it automatically saves the method to method no. 0 and shuts down

    4. Detectors (检测器)

    - Maximum no. of detector installation: three(可安装3个检测器)

    - Data Acquisition Rate : 200 Hz (采样频率)

    (1) Flame Ionization Detector(FID)

    (2) Thermal Conductivity Detector(TCD)

    MDL : 2.5 ng/ml (Standard), 400 pg/ml (uTCD)

    (3) Nitrogen-Phosphorous Detector(NPD)

    (4) Flame Photometric Detector(FPD)

    (5) Pulsed Discharge Detector(PDD

    Helium ionization mode(PDHID) :MDL (organic compound : low ppb;permanent gas : low ppm)

    Electron capture mode(PDECD) : MDL – 10-15

    (6) Electron Capture Detector (ECD