15 年

金牌会员

已认证

每周分享1.8

今天给大家分享的是20154月份《Original Paperl》上发表的一篇名为:Synthesis of amino-functionalized mesoporous materials with environmentally friendly surfactants by evaporation-induced self-assembly and their application to the adsorption of lead(II) ions

文章摘要如下:

Five amino-functionalized mesoporous materials were directly synthesized by an evaporation-induced self-assembly method. A series of environmentally friendly surfactants as templates were used, including dimethyl dioctadecyl ammonium bromide, polyethylene glycol (PEG), alkyl polyglucoside, and cetyl dimethyl betaine, in order to reduce damage to the environment in templates elution during the synthesis process. These samples were found to have two-dimensional hexagonal mesoporous structures and worm-like pores characterized by small-angle X-ray diffraction and transmission electron microscopy. Larger mesoporous pore sizes (9.8–17.9 nm) and pore volumes (0.443–0.652 cm3 g−1) were determined by N2 adsorption–desorption. Amino-functional groups were modified onto mesoporous materials, which were proved by fourier transform infrared spectroscopy and elemental analysis. PEG-S (synthesized by PEG) had the biggest pore size (17.9 nm), the highest nitrogen content (4.237 %) and relatively large pore volume (0.507 cm3 g−1) among five samples. Adsorption of Pb(II) onto five mesoporous samples differed greatly at initial concentration ranging from 0.3 to 2.6 mmol L−1. PEG-S had largest adsorption capacity, with maximum adsorption capacity being 1.166 mmol g−1 (241.36 mg g−1) in initial 1.6 mmol L−1 Pb(II) concentration. PEG is nontoxic and readily biodegradable, and PEG-S displayed the maximum adsorption capacity in the study. Therefore, PEG-S samples were selected for processing lead ions. Then further study was made to investigate lead ions adsorption isotherm, the effect of pH value on the adsorption, as well as the reuses of adsorbents.该文章中材料表征采用的是美国麦克仪器ASAP 2460

详情可参考下面链接:


美国麦克仪器  2016-01-08  |  阅读:1456
最新动态
更多  
推荐产品 供应产品

分类

留言咨询

留言类型

需求简述

联系信息

联系人

单位名称

电子邮箱

手机号

图形验证码

点击提交代表您同意《用户服务协议》《隐私协议》