高压磨粉机主要适用于加工莫氏硬度9.3级以下，湿度在6%以下的各种非易燃易爆矿产物料的加工，在冶金、建材、化工、矿山、高速公路建设、水利水电等行业有着广泛的应用，是加工石英、长石、方解石、石灰石、滑石、陶瓷、大理石、花岗岩、白云石、铝矾土、铁矿石、重晶石、膨润土、煤矸石、煤等物料的理想选择，物料的成品细度可在0.613毫米到0.033毫米之间调整。

      High pressure pulverizer is mainly applied for the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. It can produce powder from various non- flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity at 6%, such as quartz, feldspar, calcite, limestone,talcum, ceramic, griotte, ganite, dolomite, bauxite, iron ore, barite, bentonite, coal gangue, coal, etc. Adjustable range of discharge is 0.613mm to 0.033mm.

性能特点

Features:

1、设计独特，有效提高产量。主机磨腔内，在梅花架上部设计了1500kg ~ 2000kg的加压装置，同等动力下，产量提高10-20%，研磨装置对物料的碾压力提高了800-1200kgf, 成品细度*细可达1000目。 

    1、Unique design,improve production efficiently.The grinding cavity of main machine, in the same motor drive, the output is increased by 10-20%, because of there is a 1,500-2,000kg pressure device upon the star rack. And the finish fineness can reach to 1,000 mesh, result of grinder pressure increased by 800-1,200kg by grinder device.

2、物料适用性强，可针对莫氏硬度9.3级以下的各种物料。

    2、All the mineral materials with Mohs hardness below 9.3 can be crushed.

3、保护环境，除尘效果完全达到国家的标准。

    3、Environment protection, its dust-removing effect exactly meets the National Dust Discharge Standard.

4、高压磨粉机成品粒度范围广，粒径*粗可达毫米(30目)，粒径一般可达0.033毫米(425目) ，少部分物料*细可达到0.013毫米(1000目);

    4、The finished powder has a wide range of particle size from the maximum particle diameter of 0.613mm (30mesh) to the finest diameter of 0.013mm (1000mesh), while the normal particle diameter is around 0.033mm (425mesh).

5、磨辊、磨环更换周期长，剔除了离心粉碎机易损件更换周期短的弊病。

    5、Grinding roller、grinding ring long working life, avoiding from the disadvantage of quick-wear part short working life of centrifugal mill.

6、研磨装置采用重叠式多级密封，密封性能好。

7、Grinder device adopt superimposed multistage seal, the better seal ability.l

注：技术参数如有变动，恕不另行通知。Any change of technical data shall not be advised additionally.