耐诺硅酸锆珠(NanorZr-64)采用进口高纯度的锆英砂为原材料，**的滚动法的成型，中温烧结的工艺制成。珠内由致密的硅酸锆微粒组成微观结构，拒绝了毛隙和空腔，比同类珠子有更大的密度、硬度和饱满的球形度，磨耗率是同类硅酸锆珠的50%。中等的密度和硬度适合中低粘度浆料的分散和研磨，是盘式砂磨机**的配置。

氧化锆含量: 64%,                   氧化硅含量: 33%,

比      重: >4.0kg/dm³,          散      重: >2.5kg/L,

莫 氏 硬度: >7.0,                 维 氏 硬度: >900kg/mm²,

耐 压 强度: 1200N(2mm),       粒      径: 0.4-12.0mm,

吨  磨  耗: <0.05kg/吨,         包      装: 25kg/桶

NanorZr-64 zirconium silicate bead is made from high pure zircon sand, granulated in a patent way and hardened at a middle temperature kilin. Compared to the other zircon beads and the ATZ beads, it has homogeneous microstructure and no air pockets. This give them 50% lower beads wear than the others. The middle density and higher crushing strength features are suitable to grinding slurry in viscosity from low to middle. It is the best partner of disc type bead mill.

ZrO₂ %: 64 ,                               SiO₂ %: 33

Density: >4.0kg/dm³,                     Bulk Density: >2.5kg/L

Hardness Vickers: >900kg/mm²,       Crushing Strength: 1200N (2mm),

Sizes: 0.4-12.0mm ,                      Packing: 25kg/pail