参考报价:电议 型号:
产地:日本 在线咨询
|
CODE | PART NAME | REMARKS |
ACO-00-023 | aco-8 | Cleveland open Cup Flash Point Tester 克利夫兰开口杯法闪点试验仪 |
ACO-00-023 | aco-8as | Cleveland open Cup Flash Point Tester, asphalt version克利夫兰开口杯法闪点试验仪,沥青试验用 |
CODE | PART NAME | Qty | REMARKS |
ACO-02-001 | Test Cup Assembly油杯 | 1 | |
320-00-035 | Thermofuse 热熔丝 | 1 | Pack of 5, with Insulating Tube.5只装,带绝缘管 |
Gas Hose 9 x 16, 1.5m with Hose bands带夹箍煤气管 | 1 | ||
ACO-04-401 | Heating Plate, Upper加热板 | 1 | |
MPC-02-033 | AC Power Cord 电源线 | 1 | 2.5m, For 220 to 240V |
aco-8 Manuals 操作手册 | 1 | Manuals for aco-8 | |
ACO-02-441 | Skimmer Paddle除沫片 | 3 | asphalt version only沥青试验专用 |
CODE | PART NAME | REMARKS |
070-00-068 | Printer, BS2-80TS 打印机 | Prints out test data and instrument settings. 打印试验、设定数据 |
070-00-281 | Mini USB Keyboard 迷你键盘 | Sample ID entering 样品名输入 |
ACO-05-016 | Mercury Thermometer Holder 水银温度计夹座 | For Calibration 校准用 |
2年备件选购
CODE | PART NAME | Qty | CODE | PART NAME | Qty |
ACO-02-001 | Test Cup Assembly 油杯 | 1 | ACO-02-402 | Inner Detector Ring 闪点检测器内环 | 1 |
320-00-035 | Thermofuse 热熔丝 | 1 | ACO-02-403 | Outer Detector Ring 闪点检测器外环 | 1 |
ACO-05-021 | Igniter Top for aco-8 点火头 | 2 | 190-00-216 | Insulating Collar for aco-8 | 2 |
ACO-05-011 | Temperature Sensor for aco-8 温度传感器 | 1 | 100-00-011 | Heater Coil, 220/240V 800W (for 220/240V model) 加热丝 | 1 |
ACO-02-441 | Skimmer Paddle (for aco-8as only) 除沫片(沥青试验专用) | 5 |
1.SINGLE ACTION SETTING 单一动作设定
The flash detector rings and the temperature sensor are permanently mounted on a swing-arm assembly, which allows an easy setting of the specimen闪点检测环和温度传感器一起组装在测试摇臂上,加样便捷
2. EASY OPERATION 操作简单
Select a test mode and enter the expected flash point; while the instrument executes the test, you are free to do other lab work. The instrument follows the exact procedures prescribed in the test method, and the completion of the test cycle is signaled by beeps. The test result is brightly shown on the color LCD module.只需选好试验模式,输入预期闪点,仪器就严格按照标准自动进行测试,实验结束蜂鸣报警,显示试验结果。
3. AUTO FIRE POINT DETECTION 自动燃点检测
In addition to the flash point, fire point can be determined automatically. The fire point is detected when the double Ionization rings detects 5 sec of continuous burning
除闪点外,燃点也能自动检测。样品持续燃烧5秒,燃点确定。
4. AUTO FIRE CONTAINMENT 自动灭火
The fire containment lid activates automatically to help putting out fire when aco-8 detects a fire point or specimen is burning up heavily.
仪器检测到燃点或样品起火,灭火装置动作,扑灭试验火焰
5. DATA HANDLING 数据处理
The unit is equipped to store up to 200 test results and export to an optional printer or to a LIMS through an RS-232 port or USB memory.
试验结果可以保存200个,试验结果可以选购打印机打印,也可以通过USB, RS-232将数据导出到LIMS。
6. USB PORT USB接口
A USB port allows connecting USB keyboard for easy entering sample name and connecting USB flash memory for data copy to a PC or test conditions/parameters copy to the tester.
USB接口可以接USB键盘(选购件)用于样品名称的输入,也可以接闪存copy试验参数
6.PASSWORD PROTECTION 密码保护
With setting up password by the administrator, the device is protected against inadvertent change of parameters by the operator.
试验程序有密码保护功能,可以防止误操作
7. ALL-IN ONE DESIGN IN LIGHTWEIGHT 轻盈的一体式设计
The all-in-one design is much lighter than old model, ACO-7 by approximately 30%, which is world's smallest class in volume.
比ACO-7轻30%左右,也是全球体积*小的克利夫兰开口杯法闪点试验仪。
规格
TYPE 机型 | All –in one, microprocessor controlled 一体式设计,微处理器控制 |
TEST STANDARDS 试验标准 | ISO 2592, ASTM D92, IP36 |
MEASURING RANGE测试范围 | Ambient to 400℃ |
MEASUREMENT MODES 测试模式 | ISO CRM, ISO Normal, ISO SPE, ISO Flash & Fire, ISO Skim*, ASTM Normal, ASTM SPE, ASTM Flash & Fire, ASTM Skim*, and User custom *: asphalt version only |
HEATER 加热部 | Nichrome Coil heater: 800W@220V 镍铬铁加热丝 |
COOLING DEVICE 冷却装置 | Forced air cooling by sirocco fan 强制风冷 |
DISPLAY 显示 | 5.7 inch (117 x 88mm) color LCD with LED back light 彩色液晶显示 |
TEMPERATURE SENSOR温度传感器 | PT-100 in stainless steel sheath 带不锈钢套的PT-100 |
FLASH DETECTOR 闪点检测器 | Double Ionization Rings双环形电极(火焰离子检测) |
IGNITION SOURCE点火源 | Gas ignition with automatic lighting 气点火 |
BAROMETRIC CORRECTION 大气压修正 | Automatic correction by built-in barometric pressure sensor 通过内置的压力传感器自动补正 |
I/O PORT 接口 | RS-232C = 1 channel (for PC or Optional Printer) USB=1 channel (for USB keyboard or USB Flash Memory) |
SAFETY SHUTDOWN 安全设置 | Automatically shuts off and the problem is reported by buzzer and display, in case: 以下情况仪器停止运行,同时蜂鸣报警,屏幕显示 (a) EFP+30 oC or 400 oC is reached, 高于预设闪点20℃以上或超过370℃时 (b) temperature sensor is found defective, 温度传感器故障 (c) flash detector is found defective,闪点检测传感器故障 (d) thermofuse is blown (also fire containment lid activates),热熔丝断开 (e) built-in battery is found drained out,内置电池电能耗尽 (f) arm is not set in place, 检测臂未到位 (g)control computer runs away (no display) 微机失控 |
GAS SUPPLY 气源 | LP gas or natural gas (Max. pressure:10kPa) 液化气或天然气(不超过10kpa) |
POWER SUPPLY 电源 | 220/240 VAC, 50/60Hz |
POWER CONSUMPTION 功率 | **1000W |
ELECTRICITY CONSUMPTION 能耗 | 160Wh for 1 test (about 20 min), 60.48gCO2 (@ 0.378kgCO2/1kWh) |
AMBIENT TEMP. RANGE环境温度 | 10°C to 35°C |
DIMENSIONS & WEIGHT 外形尺寸 | 230mm (W) × 470mm (D) × 390mm (H) 16kg |